Professional manufacturer of thermoforming machines.
Language
Professional manufacturer of thermoforming machines.
Preparation before operation
1. Check whether the parts of the plastic cup machine are intact, including the transmission system, control system, hydraulic system, etc.
2. Ensure that the power supply is normal, the power switch is off.
3. Check the environment around the plastic cups making machine to ensure that there are no obstacles, the ground is clean and tidy.
4. Read the equipment manual carefully to understand the basic structure, working principle and operation method of the equipment.
5. Wear appropriate clothing and protective equipment, such as overalls, helmets, protective glasses.
Operation steps
1. Start the equipment
Turn on the power switch and confirm that the power is normal.
Press the start button, the disposable cup making machine starts to run.
2. Feeding
Place the raw materials in the hopper to ensure that the raw materials are evenly distributed.
Adjust the conveying speed of the raw material to make the raw material enter the molding die smoothly.
3. Molding
Adjust the position and pressure of the mold according to the production requirements.
Press the molding button, the equipment starts to carry out the molding operation.
4. Cutting
Adjust the position of the cutting knife to ensure accurate cutting.
Press the cutting button, the machine starts cutting operation.
5. Check
Check the quality of the cups to make sure it meets the requirements.
6.Cleanup
Turn off the equipment and disconnect the power supply.
Clean up all parts of the equipment, including molding die and cutting knife.
Clean up the environment around the equipment to ensure that there is no residue.
Precautions
1. It is strictly prohibited to touch the high-temperature parts of the equipment to prevent burns.
2. It is strictly prohibited to put hands or objects into the equipment to prevent injuries.
3. During operation, it is strictly prohibited to operate under the influence of alcohol to ensure operational safety.
4. When abnormalities are found in the equipment, stop operation immediately and report to the maintenance personnel.
5. Operators should regularly participate in equipment operation training to improve operating skills.
End of operation
1. Turn off the plastic cup forming machine, disconnect the power supply.
2. Clean up all parts of the plastic cup manufacturing machine to ensure that the equipment is in good condition.
3. Fill in the operation record, record the operation of the equipment and the operation process.
4. Check the environment around the equipment to ensure that there are no hidden safety hazards.
Professional manufacturer of thermoforming machines.
