Ƙwararrun masana'antar injunan thermoforming.
Harshe
Ƙwararrun masana'antar injunan thermoforming.
Filastik kofin thermoforming inji kammala kwantena masana'anta ta dumama, gyare-gyaren, yankan, stacking da sauran matakai. Babban tsarin kayan aiki ya ƙunshi abubuwa masu mahimmanci masu zuwa:
Tsarin tsarin
Jiki ne welded tare da 100 × 100mm misali murabba'in tube, da mold da aka yi da high-ƙarfi simintin karfe karfe, gyarawa da babba mold goro, wanda zai iya jure high-mita tasiri na budewa da kuma rufe mold.
Ƙungiyar tuƙi
Buɗewa da rufe gyare-gyaren ana yin su ta hanyar haɗin haɗin kayan aiki tare da motar servo don gane madaidaicin iko. Hakanan ana ɗaukar tsarin Servo don ciyarwa da na'urar mikewa.
Yanayin sarrafa yanayin zafi
Sanye take da yumbu mai nisa-infrared hita, bakin karfe babba da ƙananan tanderun dumama, dumama iri ɗaya. Tanderun dumama yana goyan bayan daidaitawar matsuguni ta hanyoyi biyu a kwance da tsaye, yana dacewa da bukatun sarrafa nau'ikan zanen gado daban-daban.
Tsarin taimako
-Cikakken rufaffiyar rarrafe: na'urar sanyaya da aka gina a ciki, faɗin takardar za'a iya daidaita shi da sauƙi a cikin kewayon 380-810mm ta hanyar daidaitawa ta hannu.
-Tacewar iska: naúrar tacewa sau uku tana tsarkake iskar da aka matsa, kuma ana iya daidaita ƙarfin iskar ƙoƙon busawa daidai don guje wa ragowar barbashi a saman samfurin da aka gama.
- Lubrication ta atomatik: Na'urar lubricating, rage lalacewa na kayan aikin injiniya da tsawaita rayuwar sabis na kayan aiki.
| Wurin aiki | Aiki | Key Tech |
| Samar da | Ana tausasa takardar ta dumama sa'an nan a ƙera shi zuwa siffa ta kofi da aka saita ta hanyar vacuum adsorption ko matsi na huhu. | Mold zafin jiki iko ± 2 ℃ don tabbatar da gyare-gyaren daidaito. |
| Yanke | Ana amfani da kayan aikin yankan madaidaicin don datsa da raba gefuna na kofuna waɗanda aka ƙera. | Servo |
| Tari | Abubuwan da aka gama ana ƙidaya su ta atomatik kuma a tara su bisa ga adadin da aka saita. | Stacking kwanciyar hankali |
| Abubuwan da ake Aiwatar da su | PS, PET, HIPS, PP, PLA, da dai sauransu |
| Fadin Sheet (mm) | 350-810 |
| Kauri Sheet (mm) | 0.3-2.0 |
| Max. Ƙirƙirar Zurfin (mm) | 180 |
| Max. Dia. Na Sheet Roll (mm) | 800 |
| Gudun (zagaye/min) | Max 25 |
| Daidaiton jigilar kayayyaki (mm) | 0.15 |
Tsarin sarrafawa mai inganci
-Ciyarwa da sakawa: isar da takardar da ke tuka motar servo, ana sarrafa kuskuren a cikin ± 0.15mm.
-Tsarin zafin jiki: kula da zafin jiki mai zaman kansa na sama da ƙananan tanderun dumama, fahimtar daidaituwar dumama takardar.
Sassaucin samarwa
-Tallafa 0.3-2.0mm kauri takardar sauya sheka, daga PLA abubuwa masu lalacewa zuwa robobin kayan abinci na PS ana iya sarrafa su da ƙarfi.
Amincewar Aiki
- Garanti na matsa lamba: ton 50 na rufaffiyar mold matsa lamba yadda ya kamata yana kawar da gefen kopin mai tashi, kuma ƙimar da ta dace na samfuran da aka gama an ƙara zuwa sama da 98%.
-Kariyar gazawa: Cikakken tsarin waƙa yana hana kutsawa cikin tarkace kuma yana rage yawan lokutan raguwa don kiyayewa.
-Shaye-shaye: kofunan shayi na madara, kofuna na kofi, kofunan ice cream, da dai sauransu. Mai jure yanayin zafi.
- Abincin gaggawa: akwatin salati, kofuna na miya, da sauransu.
-Fitowa: kofuna masu zubar da ciki, an rufe su, na iya hana zubewa.
-Likita: kofuna samfurin likitanci, kofuna na magani, waɗanda zasu iya tsayayya da lalata sinadarai.
Q1: Gudun?
A: 35 sau / min don injin komai, ƙarshe ya dogara da kayan da ainihin samfurin
Q2: Shin injin filastik na iya samar da kofuna na PLA masu lalacewa?
A: iya.
Q3: Matsakaicin diamita na kofuna na filastik?
A: A halin yanzu ana tallafawa matsakaicin diamita na 250mm.
Tare da servo iko, barga yi da kuma m adaptability, mu filastik kofin yin inji iya saduwa da samar da bukatun masana'antu da yawa don filastik kofuna.
Ƙwararrun masana'antar injunan thermoforming.
